KW-type spin-coater

Spin-coater

KW-type spin-coater is used for the surface of plate making such as
semiconductor wafer, glass slide, chip, substrate, ITO conductive glass
and so on。This product has some advantages as following,stability speed
and speedy start。It can ensure semiconductor materials to consistency
and uniformity in the coating thickness and uniformity。This product
usually used in conjunction with oil-void air compressor. At present, there
is the model KW-4A and KW-5 type.

Product main features:

1、High-frequency speed regulation, stability performance better,speed of
adjustment displayed by the figures。

2、It’s very stable when the speed at 500 ~ 8000 r / min range。

3、Dual speed。At startup, the first low-speed operation, so that glue
spread, and then automatically change to the high-speed operation。Speed
and the corresponding two separately adjustable time, the time control at
1 ~ 18 seconds and 3 seconds ~ 1 minute.
4、With timing function;

5、use photoelectric to measure the speed 。It generated photoelectric
pulse, and the crystal frequency measured the high precision speed。

6、use solenoid valve to control ” attract the sample “,so a oil-void air
compressor can take several spin-coaters at the same time , fit assembly
line process, improve efficiency

7、Because of damping on the structure installation,low noise on
operation,and uniform coating surface, and adjusting the speed of coating
thickness adjustment。

Performance Indicators:

KW-4A type spin-coater (photograph)

1、The speed range and glue uniformity time

Ⅰgear speed range:500-2000 rotation per minute

Ⅰgear glue uniformity time:2-18 second

Ⅱgear speed range:1300-8000 rotation per minute

Ⅱgear glue uniformity time:3-60 second

2、application:Φ5-Φ100mm silicon and other materials。

3、LED figures show,speed stability:±1%,the uniformity of glue:±3%。

4、Motor Power:40W

5、Vacuum pump exhaust rate≥60 litre per minute

6、Small size, light weight, easy to operate

7、Equipment size:210×220×160mm
KW-5 type spin-coater (photograph)

1、The speed range and glue uniformity time

Ⅰgear Speed range:500-1000 rotation per minute

Ⅰgear glue uniformity time:2-18 second

Ⅱgear Speed range:1000-5000 rotation per minute

Ⅱgear glue uniformity time:3-60 second

2、application:Φ100-Φ200mm(4”~8”) silicon and other materials。

3、LED figures show,speed stability:±1%,the uniformity of glue:±5%。

4、Motor Power:140W

5、Vacuum pump exhaust rate:1litre per minute

6、Equipment size:500×500×460mm

Leave a Reply